Well I just got the spec.’s for Skunk2 New cams for the H22A. I'm planning on running stage II. But I'm little concern about the lift on the intake cam. Here are the spec.’s on Stage II. Intake Cam 267' duration and .505 Lift. Exhaust 274' degrees duration and .465 lift. Here are stage I spec.’s Intake- 266' duration .475 lift, Exhaust- 262' duration and .436 lift. Do you guy's think stage II cams are too big! Thanks

 

For what setup do you have? I believe it concerns the stiffness of your valve springs; your gonna have to run new valve springs for stage II anyway so get some that can handle the lift.

 

those lift specs are close to ZEX's 57300 street/strip cam- you should definitely use different springs.





[Modified by fixhondas, 10:01 PM 2/22/2002]

 

um.. didnt you post this in the prelude forum? and didnt i answer it already?

according to this thread:
http://www.superhonda.com/forum/show...?threadid=1962

(read further than the opening post in the thread)
those specs are for the stage 3 skunk2's. the stage 2's have less agressive specs