i picked up a 4dr integra shell and the key only works for the ignition. Door locks and trunk lock is broken/missing. how would i go about replacing all the doors and trunk locks while keeping it so that the ignition key will work on everything. i dont want a seperate key for ignition and doors. thanks guys

 

you can buy a complete set of new locks for the whole car from acura. it is kinda pricey though. or you can try to find a complete set used, but thats kinda rare.

 

Check your local bone yards, [PicknPull] find one and pull all the cylinders, if your lucky there will be a key, if not, take the VIN and have a key cut. 94

 

Better yet, pull the cylinders, get your car's key code from Acura, and order the key plates new from Honda. https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/diy-fixing-doorlocks-open-any-key-2237857/

Pretty much any Civic or teg locks will do.

 

This is exactly what I did. Took my key and tried several cars until I found ones that worked, then yanked the cylinders.

 

You can also take the VIN off the car you remove the cylinders from and have a key cut for them. 94

 

went to a junk yard in lacey,wa and picked up a full set and misc parts for 14 bucks! lol