Bearing Identification?!
Thread Starter
Member
Joined: Oct 2002
Posts: 1,223
Likes: 0
From: Charleston, SC
Bearing Identification?!
I know this has been discussed and I tried to find what I was looking for but failed. I know that you can use identifying letters and/or numbers stamped into the rods and/or block to properly match bearing sizes, provided everything is still in spec. I did find this post -
https://honda-tech.com/zerothread?id=715490 But it only specifies color vs. size. Can anyone help me out with this? I pulled apart the stock b16 I am currently building. Some of the main bearings are black(2.010mm-2.007mm), while others do not appear to have any color markings. Any help guys?
https://honda-tech.com/zerothread?id=715490 But it only specifies color vs. size. Can anyone help me out with this? I pulled apart the stock b16 I am currently building. Some of the main bearings are black(2.010mm-2.007mm), while others do not appear to have any color markings. Any help guys?
Thread
Thread Starter
Forum
Replies
Last Post
waxbunny
Acura Integra
1
Oct 14, 2004 06:12 PM
boredracer408
Forced Induction
2
Jan 3, 2004 08:22 PM
