Can anyone tell me where I can send my ecu to get a basemap tune. I have searched a little bit and couldn't find anything in the Mass. area. Thanks

 

You need to be more specific about what EMS you are using. I am assuming the more popular programs and also what does your setup consit of?

 

Im not sure which ecu I am going to use. From what I have read it seems it would be better to convert to obd1 and run a p28. But on the other hand I don't have vtec and I believe that the p28 is a vtec ecu. Anyway, which ecu do you think would be best to run? And I am running a t3/t4 .48/.50, probably 370cc injectors, a walbro 255, and a 27x6.5x2.5 intercooler. My goal is somewhere in the ball park of 250whp. Thanks

 

Get larger injectors & find your self a local dyno tuner for the best results.
If you plan on running on a basemap, buy your self a wideband oxygen sensor.

 

I have a Dyno here at school but I have never tuned before. I do plan on getting a wideband just to be on the safe side.