i am thinking of getting a b series spoon moter for my 93 integra ls but not sure if it would fit could any one help me out that would be great

 

it would fit flawlessly, but IMHO i'd keep the ls and build it.

 

do you even know what the specs on this RACE motor is ?

why do you want a Spoon motor ?

 

Spoon motor = not streetable.

 

you guys realize spoon sells perfectly streetable B18Clongblocks that anybody can get their hands on dont you?

talk to any of the A&J guys, they'll help you out.

they dyno in the 180whp range, and are nothing more than a spoon balanced JDM B18C R longblock... cant remember if they come with spoon cams or not, regardless they are VERY streetable.

 

Not true.

 

I stand corrected.

 

back to the original Q.

Of course it will fit in there, you might want to find a tranny with LSD or get one for what is in there right now (praying you have a 5 speed).
You may need to do some wiring shenanegans but nothing hard at all.
IM or email this guy on the board here, "slowerthanu" because he has an ITR motor in his 90-93 Integra and can probably help you out if you dont find answeres in the SEARCH function and reading all of the posts around this site.

 

thanks for all the help !!!

 

The point is that due to Spoons custom clearances, the motors do not last as long. The clearances are less tight, putting more power to the ground, however they don't last as long. They are streetable, just not durable.

 

if u plan on spending the $$$ on a Spoon motor u might as well go get a new car to put it in

 

its an endurance race motor. if you plan on owning one, you best get used to rebuilding it. hmm, how many engine mechanics do you think have seen that motor? not many. just buy a ITR longblock and be done with it. if you arent happy with that you wont be happy with much else. ITR motors with mild tuning can realize 185/130 to the wheels with minimal tuning.


[Modified by MikeSarr_GSR, 8:25 PM 10/23/2002]

 

Everything is balanced... no Spoon Sport cams... headgasket is replaced with a Spoon version to raise compression... comes with normal Red-coverplate (like original)

Product Name Model Type Parts no. Price Quantity
F20C Engine Assy. - F20C 10000-AP1-001 \450,000 1Set
B16A Engine Assy. - B16A 10000-16A-901 \380,000 1Set
B16B Engine Assy. - B16B 10000-16B-901 \380,000 1Set
B18C Engine Assy. - B18C 10000-18C-901 \380,000 1Set

The one everybody are the ones custom built which comes with a Yellow-coverplate... These can have huge compression and cam lift...

Just check out http://www.spoon.jp go to product line up and go to drive train -> Power units... There you will find complete engine assembly units...

Otherwhise check http://www.inlinefour.com/spoonbserena.html

 

inline four is selling a b18c spoon long block
http://www.inlinefour.com

 

spoon=waste of money
for what your gonna spend on that engine
you could build one, that will hand a spoon motor its ***.

 

spoon motor's are junk , for the price of one of those damn thing i could build you something alot i mean alot better......

 

With a spoon motor you are definatly paying for the name

 

i hear that.

 

check the sig ***

 

wwwooooooow
you think anyone else cares what your concept of money is? No.
most people dont waste money like you SAY you can.
to 99.8% of the population, the price of things matter

 

read my quote over again and again and again. Maybe you will then be able to understand my quote. I said what is 1,000 dollars to ME!(fong) is .50cents to other people. Did i say i have alot of money to waste? No, If anything it was the exact opposite.
Thank you, have a nice day and dont forget to take your books

 

i should put in my sig:

Price is irrelevant. What is $100 dollars to me, is .05 cents to some people.