assembly lube
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 507
Likes: 0
From: WA
assembly lube
when putting the main and rod berings in, do you put some assembly lube on both sides of the bering? or just the side that touches the crank? thanks
oh and where else should i put the assy lube?
oh and where else should i put the assy lube?
Honda-Tech Member
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Re: assembly lube (bobo)
Just put it inbetween the crank and the bearing for both the cap side, rod, and block sides. Oh and if you're talkin about anywhere in the motor the cam journals will need some too if you have to remove the cams then put them back in.
[Modified by JDMspecEG6, 6:01 AM 1/1/2002]
[Modified by JDMspecEG6, 6:01 AM 1/1/2002]
Thread
Thread Starter
Forum
Replies
Last Post
2000BoostedEX
Forced Induction
33
Aug 10, 2008 07:18 PM
AK77
Acura Integra
3
Sep 20, 2007 06:42 PM
canuck-mx6
Acura Integra Type-R
14
Jun 3, 2002 04:38 PM
