Im sure there are threads like this out there, but I couldnt find the info I needed. I have no idea how to install it, If you guys could explain to me which wires go where, I would have no problem soldering the wires, There is a white plug with a red/green/blue wire going into it, and then there is the grey and black that are separate, this is the pen style turbo timer. If you guys know of where I could find a decent write up, or pictures of ignition wiring it would be greatly appreciated. Thanks in advance

 

A model number would help.

The ones I have done are...

Red- 12V+ constant, [hot at all times].
Green - ign.1, [hot in run and start]
Blue - ign.2, [hot in run] you may or may not need it. depends on MM&Y of car.
Gray - hand/E-brake.
Black - ground. 94

 

Thank you, it is going on an eg hatch, I am not sure of the model number of the unit, it is just a pen style apexi timer.