i have a 94 hb cx jdm b16 ...swap
i can not rev higher than like 2500rpm's
its sounds like a tps sensor but i changed it
i checked my check engine codes....
i'm getting numbers 10, 14 , and 7 which are airtemp, tps, and evac, correct me if i'm wrong...
i tried clearing these codes .. but they still come back

i' willing to take any suggestions..... before i end up spending money to have someone look at it...
i've completely rebuilt my motor and would like the pleasure of saying i did it...
help me out please thanx

 

Sounds like you got some plugs plugged into the wrong things. Double check the plug ins and maybe just try switching them. Also make sure your TPS is all the way in the TB