Adding a knock sensor to a B18B
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: Trinidad, W.I.
Posts: 5,089
Likes: 0
Received 0 Likes
on
0 Posts
Adding a knock sensor to a B18B
I have a 94 B18B block which I believe does not have a knock sensor... if so:
I want to add the knock sensor, would I be able to add a used stock sensor from another block or do I have to go aftermarket ?
I want to add the knock sensor, would I be able to add a used stock sensor from another block or do I have to go aftermarket ?
#2
Member
Join Date: Jul 2001
Location: clearwater, florida, united states
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Re: Adding a knock sensor to a B18B (X2BOARD)
get a j&s safe guard. but i belive that you can wire it up and the ecu has the source to power the ks.
#3
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: Trinidad, W.I.
Posts: 5,089
Likes: 0
Received 0 Likes
on
0 Posts
Re: Adding a knock sensor to a B18B (rainforest)
I have checked a couple of sites, but cannot find just the J&S ks, any word on the price ?
#4
Honda-Tech Member
Join Date: Nov 2001
Location: pa, usa
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
#5
Member
Join Date: Feb 2002
Location: Big Black Ben
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Re: Adding a knock sensor to a B18B (X2BOARD)
I never added the thing.. too lazy.. Just unscrew the CEL on the dash... VTEC still kicks at 4800 rpm all the time regardless.
#6
Honda-Tech Member
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: Adding a knock sensor to a B18B (b18bvtec4drteg)
I never added the thing.. too lazy.. Just unscrew the CEL on the dash... VTEC still kicks at 4800 rpm all the time regardless.
Thread
Thread Starter
Forum
Replies
Last Post