first off i have an original 94 bb1 prelude vtec and my vtec is not engaging ? any insight why ? a little info on my car . jdm H22A* usdm p13 ecu*new Cat* removed balance shaft belt* no check engine light* my fan switch on thermostate housing is not working so i rigged a toggle switch for now !
* New Valve timing oil pressure switch * tested Vtec solenoid and i can hear it click when i applie 12 volts...pounded out some dents on my oil pan..i did notice that a fuse was missing from #19 which says its th ECU, but i see two for the ECU ? so im thinking my ECU is the culprit ?