Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

I DONT KNOW IF i DID A GOOD BUSSINES

Thread Tools
 
Search this Thread
 
Old Aug 24, 2004 | 10:05 PM
  #1  
EK FLY's Avatar
Thread Starter
Honda-Tech Member
20 Year Member
 
Joined: Aug 2004
Posts: 2,379
Likes: 1
From: Washington Dc
Default I DONT KNOW IF i DID A GOOD BUSSINES

well fisrt of all this is my first post on this forum
second I just want to comment that i resently bough a b18c1 for my 93 dx hb I 'am gonna pay like 1.000 to this mechanic who is my friend i dont know were he got the engine frome but he sold it to me really cheap well anyways the engine has a small problem the piston of the center right blow up and he told me that by replacing the piston it was not gonna be a problem with the engine ok then i decide to buy it I though that I can put some hig permance pistons on it like JE froged piston or how ever u spell it well I allready gave him 600 $ I'am gonna give him 200 tomorrow and the other 200 bux this friday it come with everithing tranny axels vtec harness but he said he did not had a ECU for me oww well i thoug I can get a 50$ ecu on ebay ow well what do u guys thing i need some advise for this engine, the negine has only 40.000 miles on ..

what ya think

oww well I'am sorry for my bad english I'am latin
Reply
Old Aug 24, 2004 | 10:54 PM
  #2  
JDMisGOOD's Avatar
Honda-Tech Member
 
Joined: Jun 2003
Posts: 4,661
Likes: 0
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (racing_beat)

$1000 for a GSR swap? its blown up? its probably stolen...
Reply
Old Aug 24, 2004 | 11:01 PM
  #3  
Slopoke's Avatar
Honda-Tech Member
 
Joined: Feb 2001
Posts: 4,830
Likes: 3
From: blah blah blah
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (racing_beat)

Sounds like a decent deal to me, even with the bad cylinder.

Go for it.

Reply
Old Aug 25, 2004 | 05:30 AM
  #4  
94solchick's Avatar
 
Joined: Jul 2004
Posts: 208
Likes: 0
From: Millersville, Maryland, USA
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (Slopoke)

hey dude, try sentences. I can't concentrate on one sentence that goes on and on and on and on...
Reply
Old Aug 25, 2004 | 05:52 AM
  #5  
EK FLY's Avatar
Thread Starter
Honda-Tech Member
20 Year Member
 
Joined: Aug 2004
Posts: 2,379
Likes: 1
From: Washington Dc
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (honda94delsolchick)

i told ya man I'am sorry I'am latin and I dont type good english
Reply
Old Aug 25, 2004 | 06:30 AM
  #6  
01-1293's Avatar
 
Joined: Feb 2002
Posts: 1,066
Likes: 0
From: Burlington, Ontario, Canada
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (racing_beat)

sound slike a steal....a gsr swap should cost $3500 usd
Reply
Old Aug 25, 2004 | 06:34 AM
  #7  
integraver's Avatar
Honda-Tech Member
 
Joined: Apr 2003
Posts: 864
Likes: 0
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (racing_beat)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by honda94delsolchick &raquo;</TD></TR><TR><TD CLASS="quote">hey dude, try sentences. I can't concentrate on one sentence that goes on and on and on and on...</TD></TR></TABLE>

school helps j/k haha
Reply
Old Aug 25, 2004 | 06:36 AM
  #8  
PLAN:B's Avatar
Honda-Tech Member
 
Joined: Jul 2004
Posts: 2,712
Likes: 1
From: Orange, CA, USA
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (01-1293)

Lucy! You got some splainin' to do!

It's a good deal Ricky, just fix the damn thing and hopefully there aren't anymore problems to deal w/. Because then you could have bought a legit motor for the price of having to fix this one. Good luck
Reply
Old Aug 25, 2004 | 06:46 AM
  #9  
ace42004's Avatar
Honda-Tech Member
 
Joined: Jul 2004
Posts: 748
Likes: 0
From: Denver, PA
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (PLANBmotorsports)

ummmm...if hes a mechanic i dont think it would be stolen..the thing u need to worry about is if the blown piston is the only problem. Seeing how he is a mechanic he could be tellin u all this BS just so u will buy the motor from him..then again he is ur friend so if I were u I would buy it..and if u have lots of problem with it u will know if hes a true friend or not...
Reply
Old Aug 25, 2004 | 07:12 AM
  #10  
milton's Avatar
 
Joined: Nov 2003
Posts: 2,868
Likes: 0
From: NOR CAL, CA, usa
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (01-1293)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 01-1293 &raquo;</TD></TR><TR><TD CLASS="quote">sound slike a steal....a gsr swap should cost $3500 usd</TD></TR></TABLE>

SOUNDS LIKE IT TO ME TOO!
Reply
Old Aug 25, 2004 | 07:40 AM
  #11  
EK FLY's Avatar
Thread Starter
Honda-Tech Member
20 Year Member
 
Joined: Aug 2004
Posts: 2,379
Likes: 1
From: Washington Dc
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (milton)

i dont care if its stolen or not ,,, I think is a good deal btw we have been friends since we graduate frome hs , that was 3 years ago so i dont thing he rip me off anyways the cylinders are in good shape no scratchs around the cylinder wall (that what I fear ) but the only thing is that were the area of the piston ring and the top part of it is kinda broken i remove the head this morning and I saw that but anyways anyone know were can I buy like a some,,,, taipa RRrrrrr piston
Reply
Old Aug 25, 2004 | 08:24 AM
  #12  
Archidictus's Avatar
Unceasing Measure
20 Year Member
 
Joined: Feb 2002
Posts: 13,088
Likes: 6
From: Columbus Ohio
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (racing_beat)

It's pretty hard to "blow up" a piston without some damage to:

1.) the rod
2.) the crank
3.) the sleeve
4.) the block (if #3)
5.) the bearings
6.) the valves

Now, if you trust his judgement that all of the above are perfectly fine and within OEM spec, it'll probably work out and you'll have a fine car. If not, you're paying $1000 for nothing. End of story.
Reply
Old Aug 25, 2004 | 08:29 AM
  #13  
jolt-tsp's Avatar
Honda-Tech Member
 
Joined: Jan 2003
Posts: 2,407
Likes: 0
From: Blue Ridge, TX, USA
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (Archidictus)

Some blueprinting might be in order here. Make sure everything is in spec now so you don't need to rip it apart again.
Reply
Old Aug 25, 2004 | 08:56 AM
  #14  
Marauder's Avatar
Honda-Tech Member
 
Joined: May 2002
Posts: 5,187
Likes: 2
From: SoCal, CA, USA
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (ace42004)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ace42004 &raquo;</TD></TR><TR><TD CLASS="quote">ummmm...if hes a mechanic i dont think it would be stolen..</TD></TR></TABLE>

Yeah, all mechanics are honest, and no one strips stollen cars to sell you "new" parts for your car when it brakes down!

Reply
Old Aug 25, 2004 | 08:59 AM
  #15  
JDMisGOOD's Avatar
Honda-Tech Member
 
Joined: Jun 2003
Posts: 4,661
Likes: 0
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (Marauder)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Marauder &raquo;</TD></TR><TR><TD CLASS="quote">

Yeah, all mechanics are honest, and no one strips stollen cars to sell you "new" parts for your car when it brakes down!

</TD></TR></TABLE>

w3rd
Reply
Old Aug 25, 2004 | 09:00 AM
  #16  
JDMisGOOD's Avatar
Honda-Tech Member
 
Joined: Jun 2003
Posts: 4,661
Likes: 0
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (racing_beat)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racing_beat &raquo;</TD></TR><TR><TD CLASS="quote">i dont care if its stolen or not ,,, I think is a good deal btw we have been friends since we graduate frome hs , that was 3 years ago so i dont thing he rip me off anyways the cylinders are in good shape no scratchs around the cylinder wall (that what I fear ) but the only thing is that were the area of the piston ring and the top part of it is kinda broken i remove the head this morning and I saw that but anyways anyone know were can I buy like a some,,,, taipa RRrrrrr piston </TD></TR></TABLE>


you should care...it aint worth gettin nailed for recieving stolen property...
Reply
Old Aug 28, 2004 | 12:52 PM
  #17  
EK FLY's Avatar
Thread Starter
Honda-Tech Member
20 Year Member
 
Joined: Aug 2004
Posts: 2,379
Likes: 1
From: Washington Dc
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (JDMisGOOD)

i'AM LOOKING TO PUT ITR PISTONS
Reply
Old Aug 28, 2004 | 04:09 PM
  #18  
b18bcivic's Avatar
Member
 
Joined: Aug 2001
Posts: 2,328
Likes: 0
From: Southside Chicago, IL, usa
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (racing_beat)

it's phez!!!
Reply
Old Aug 28, 2004 | 06:23 PM
  #19  
Eyes Only's Avatar
Member
 
Joined: Apr 2003
Posts: 1,134
Likes: 0
From: Sumter, SC, USA
Default Re: (iijrzpnoyii)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iijrzpnoyii &raquo;</TD></TR><TR><TD CLASS="quote">before you buy it make sure it says B18C1 on the block and theres no vin plate on it. the vin plate makes for some reason makes it slower. </TD></TR></TABLE>


Dude just shut your hole if all going to say is stupid unless ****
Reply
Old Aug 28, 2004 | 06:35 PM
  #20  
EK FLY's Avatar
Thread Starter
Honda-Tech Member
20 Year Member
 
Joined: Aug 2004
Posts: 2,379
Likes: 1
From: Washington Dc
Default Re: (Pho Bos)

YEA i CHECK THE ENGINE CODE B18C1 AND IN A FEW PARTS THAT SAID P72 WELL IS THERE ANYONE NEAR maryland so it can help me to swamp my motor I live on gaithersburg md
Reply
Old Aug 28, 2004 | 07:03 PM
  #21  
AsianMullet's Avatar
 
Joined: Jul 2002
Posts: 1,842
Likes: 0
From: The Bean, MA, USA
Default Re: (racing_beat)

if there's a big hole in the piston...where is that piece of the piston thats missing??? hope you didnt cause any more damage then JUST a piston
Reply
Old Aug 28, 2004 | 08:40 PM
  #22  
DownhillSpecialist's Avatar
 
Joined: May 2004
Posts: 292
Likes: 0
From: Los Angeles,, Ca., United States of Hypocracy
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (racing_beat)

Your mexican friend has a gsr motor and wants to sell it to you for 1,000 dollars...
It may be stolen you know...but...you could always find out and make sure its NOT by cheking out the identification number right? Check that first. If it's legit, and thats the only problem with it, its worth it IMO.
Reply
Old Aug 28, 2004 | 08:48 PM
  #23  
BauleyCivic's Avatar
Risky Business
20 Year Member
 
Joined: Jul 2002
Posts: 25,235
Likes: 47
From: Trackside with the smoking bee
Default Re: I DONT KNOW IF i DID A GOOD BUSSINES (DownhillSpecialist)

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PooM
All Motor / Naturally Aspirated
5
May 23, 2008 10:12 AM
vandersmissenc
Honda Civic / Del Sol (1992 - 2000)
15
Feb 16, 2006 01:20 PM
SSBPGSR
Forced Induction
4
Mar 28, 2005 12:52 PM
bluedelsol
Tech / Misc
8
Aug 24, 2002 02:24 PM
quikrpm'z
Forced Induction
12
Oct 5, 2001 08:05 AM




All times are GMT -8. The time now is 09:26 AM.