what does it take to make 450-550 whp out of a b16
Thread Starter
Joined: Aug 2004
Posts: 7
Likes: 0
From: MANYSODAS, CA
what does it take to make 450-550 whp out of a b16
im wondering what it takes to make 450 - 550 whp from a b16? car is going to be street driven but it could be as close to as a drag car as possiable, any suggestions and any proving parts to make that kind of power.
Honda-Tech Member
Joined: Jan 2002
Posts: 433
Likes: 1
From: San Antonio, TX
Re: what does it take to make 450-550 whp out of a b16 (YAJSPEED)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YAJSPEED »</TD></TR><TR><TD CLASS="quote">im wondering what it takes to make 450 - 550 whp from a b16? car is going to be street driven but it could be as close to as a drag car as possiable, any suggestions and any proving parts to make that kind of power.
</TD></TR></TABLE>
a whole lot of $.
</TD></TR></TABLE>
a whole lot of $.
Honda-Tech Member
Joined: Jul 2001
Posts: 5,608
Likes: 1
From: All around, De/Pa
Re: what does it take to make 450-550 whp out of a b16 (YAJSPEED)
A decent sized turbo. Sleeving. Engine and fuel management. Tuning!
You getting **** for answers cause you need to be more specific with your question.
You getting **** for answers cause you need to be more specific with your question.
Joined: Oct 2003
Posts: 1,124
Likes: 0
From: Bloomfield Hills, MI, USA
Re: what does it take to make 450-550 whp out of a b16 (YAJSPEED)
ok the reason u get bullshit answers is because there are houndreds of posts about "my 400whp b16 dyno" all u have to do is search. if u want a real answer here it is. u need to upgrade all internals ie. pisonts, rods, sleeves, valve springs etc. u also need a big turbo. and with all that a good engine mangagement system is required. aem is the best because it has the most features or hondata will do as well. 550whp will not be streetable and u will not be happy with any turbo giving u that power. ur not gonna wanna run slicks on the street. in a fwd car 350-400 is ideal. ur also going to need a great clutch and great tires. but please before u start buying just search and see what other people have done.
Trending Topics
Honda-Tech Member
Joined: Aug 2003
Posts: 2,607
Likes: 0
From: Sandusky, Ohio, USA
Answer: pistons, rods, sleeving, sc61 and a nice manifold all the other blah blah blah. hondata/uberdata/aem ems, GOOD tuning, and a responsible driver who won't block it up
you will hit your goal and then some.
you will hit your goal and then some.
Member
Joined: Jan 2003
Posts: 2,202
Likes: 0
From: Minneapolis, MN
Re: what does it take to make 450-550 whp out of a b16 (YAJSPEED)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YAJSPEED »</TD></TR><TR><TD CLASS="quote">im wondering what it takes to make 450 - 550 whp from a b16? car is going to be street driven but it could be as close to as a drag car as possiable, any suggestions and any proving parts to make that kind of power.
</TD></TR></TABLE>
"With about $10,00 dollars, overnight parts from Ja-pan"
</TD></TR></TABLE>
"With about $10,00 dollars, overnight parts from Ja-pan"
Member
Joined: Jan 2003
Posts: 2,202
Likes: 0
From: Minneapolis, MN
Re: what does it take to make 450-550 whp out of a b16 (YAJSPEED)
Search for these terms for 450whp..
Full Race
AEM EMS
Hondata
Earl
When you search these and spend 24 hours reading - you'll know what it takes to make 450whp from a B16 based on stuff from the board.
Your welcome.
Full Race
AEM EMS
Hondata
Earl
When you search these and spend 24 hours reading - you'll know what it takes to make 450whp from a B16 based on stuff from the board.
Your welcome.
Thread
Thread Starter
Forum
Replies
Last Post
nek9
All Motor / Naturally Aspirated
43
Jun 22, 2006 05:14 PM
