anyone have any experience with this manifold???

loooks funky....

 

PM hulkhb....From when I talked to him, he seemed like a really cool guy, he works at crpturbo.com BTW

 

Wow, medusa for realz!

Is that TRUE equal length?

 

Yeah Jason (Hulkhb) is a hella cool guy. Does great work. He is making my manifold and downpipe as we speak.

 

i have not used one but buy looking at the construction of it i give it a

 

damn that mani looks insane!

 

I wouldn't use that thing.

If your gonna use a manifold of that type go Full race

 

The thread is about crp so let's keep to crp. Now full race is bomb don't get me wrong but crp also makes manifolds with lifetime warranty's as well.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eLusive ek4 &raquo;</TD></TR><TR><TD CLASS="quote">I wouldn't use that thing.

If your gonna use a manifold of that type go Full race</TD></TR></TABLE>
Talkin **** when you don't even know...

 

That's an insane looking manifold, it has so many bends!

 

i never liked medusa when i was a kid...and that mani reminds me of her. but it sure is awesome looking

 

good luck checking your oil. The curse words will start flyin after you've burnt your hands a hundred times

 

lol yeah i would have to agree with you on that one Nick

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecrob16a &raquo;</TD></TR><TR><TD CLASS="quote">
Talkin **** when you don't even know... </TD></TR></TABLE>

Not even gonna start do your research on somebody before you know what they say.

There are alot of things that manifold company's do that i don't agree with. To tell me I don't know i suppose your gonna design my manifold for me?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FOrSfEd &raquo;</TD></TR><TR><TD CLASS="quote">The thread is about crp so let's keep to crp. Now full race is bomb don't get me wrong but crp also makes manifolds with lifetime warranty's as well.</TD></TR></TABLE>

Apologies for getting off topic


I just don't agree with the way that manifold was designed and the way the tubing pack is routed. Chances are (measuring it pending) that it is not very close to being equal length

 

eLusive ek4 is a strange fellow talk about internet tough guy who has a serious problem. Check this conversation out....
(6:56 PM 8/19/2004) eLusive ek4: I don't even know? talking ****?

I simply gave my opinion of the manifold and offered an alternative selection no need for you immature response.

As far not knowing, thats far from the truth considering i design headers all day long for top race teams

Oh what do you do for a living by the way?
(7:09 PM 8/19/2004) vtecrob16a: I think you did, state something with no knowledge..Don't start getting tough guy on the internet. You must be a real tool to take time out to instant message me
(7:16 PM 8/19/2004) eLusive ek4: No not at all and i'm not being aoug all how d have no real knowledge ?

Can you explain to me how a merge collector works? what are they key elements of manifold design please enlighten me?
(7:52 PM 8/19/2004) vtecrob16a: dude you have serious problems,you can't spell..so I really can't understand you...Jason does my stuff and I don't like people talking bad about him ,this is the end of the conversation for me. You're right I don't design headers,I pay people to
(8:01 PM 8/19/2004) eLusive ek4: It's not the problem of i cant spell my typing needs work didnt know that was a serious problem

I never said anyhting bad either i said i wouldn't use that manifold i don't care who jason is. Pay people to design a good header then.

Don't tell me i don't have knowledge when your in my area of this industry do your homework next time

He says he didn't say anything bad but he said let's quote it
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eLusive ek4 &raquo;</TD></TR><TR><TD CLASS="quote">I wouldn't use that thing.

If your gonna use a manifold of that type go Full race</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperTeg95 &raquo;</TD></TR><TR><TD CLASS="quote">good luck checking your oil. The curse words will start flyin after you've burnt your hands a hundred times</TD></TR></TABLE>

alway's better to check oil lever when engine is cold... oil is cold so no thermal dillatation and no oil in head or oil passages so you don't miss read and add too much after this.

just not a good arguement to discard a prolly great performing manifold

Kranked

 

It looks cool but it can't possibly be the ideal configuration. For one thing the volume of the manifold is twice what it needs to be. It may have been designed to perfect exhaust pulsing by providing equal volume in each primary, but all more bends do it hurt pulsing. (The velocity at the outside of a bend increases relative to the inside, and does not immediately equalize when it straightens out)

 

I dont see any portion where i stated i was tough at all please post this in the proper forum where it belongs like the gneral discussion forum.

You were the one that instigated this anyways by saying

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecrob16a &raquo;</TD></TR><TR><TD CLASS="quote">
Talkin **** when you don't even know... </TD></TR></TABLE>

How do you know that I don't know doooo your hooome woooorkkkkkk!!!!!

 

thats a wild one

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eLusive ek4 &raquo;</TD></TR><TR><TD CLASS="quote">If your gonna use a manifold of that type go Full race</TD></TR></TABLE>

But Full Race doesn't offer a Medusa type manifold?

 

apparently neither does crp..they are no longer going too make them..not enough demand or something

 

Looks like ALOT of work to fab it up. I wouldn't make them either if they weren't flying off the shelves.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecrob16a &raquo;</TD></TR><TR><TD CLASS="quote">eLusive ek4 is a strange fellow talk about internet tough guy who has a serious problem. Check this conversation out....
(6:56 PM 8/19/2004) eLusive ek4: I don't even know? talking ****?

I simply gave my opinion of the manifold and offered an alternative selection no need for you immature response.

As far not knowing, thats far from the truth considering i design headers all day long for top race teams

Oh what do you do for a living by the way?
(7:09 PM 8/19/2004) vtecrob16a: I think you did, state something with no knowledge..Don't start getting tough guy on the internet. You must be a real tool to take time out to instant message me
(7:16 PM 8/19/2004) eLusive ek4: No not at all and i'm not being aoug all how d have no real knowledge ?

Can you explain to me how a merge collector works? what are they key elements of manifold design please enlighten me?
(7:52 PM 8/19/2004) vtecrob16a: dude you have serious problems,you can't spell..so I really can't understand you...Jason does my stuff and I don't like people talking bad about him ,this is the end of the conversation for me. You're right I don't design headers,I pay people to
(8:01 PM 8/19/2004) eLusive ek4: It's not the problem of i cant spell my typing needs work didnt know that was a serious problem

I never said anyhting bad either i said i wouldn't use that manifold i don't care who jason is. Pay people to design a good header then.

Don't tell me i don't have knowledge when your in my area of this industry do your homework next time

He says he didn't say anything bad but he said let's quote it
</TD></TR></TABLE>
lets stay on topic...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Finest &raquo;</TD></TR><TR><TD CLASS="quote">Looks like ALOT of work to fab it up. I wouldn't make them either if they weren't flying off the shelves.

</TD></TR></TABLE>

yeah..i'd offer it, but not stock it