Can anyone point me in the direction of a good machine shop to do my sleeving for my h22a4? I'm looking at getting darton sleeves with a 89mm bore. 89 is 2.3L right?

 

where are you located? talk to anthony(precisionh23a) he has an awesome machine by him. thats who did my block :

 

Northern california...

 

isnt GE right by you? or same state atleast

 

I'm not sure, I couldn't find much about actual shops that would do the work.

 

you send your block to them, Benson is good to. i wouold talk to Earl on here, he does benson

 

yea I was thinking earl originally. It's too bad there isn't **** for performance shops in norcal

 

well what can be said man, norcal sucks nards. lol.

look around, there are tons of machine shops in orange. Try the big boys Darton, GE, Benson. Get out the yellow pages and have a go

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Matgallis &raquo;</TD></TR><TR><TD CLASS="quote"> 89 is 2.3L right?</TD></TR></TABLE>

actually the 95mm crank is what gives the h23 2.3l
it has the same bore as the h22 which is 87mm

 

Golden Eagle is located in San Dimas CA, a bit of a drive but the best around in your situation....

or you can ship, they did my block, i live in delaware.......

 

Just for reference, I can have any block sleeved with the darton MID sleeves for $775. That includes a final bore, deck, and install.

 

With the stock stroke, an 89mm bore will indeed give you 2.3 liters (well, 2.257, actually - but stock is 2.157, so . . . . )

 

what part of norcal are u in, i know a shop that deals with golden eagle in sacramento..