OKay so yesterday i picked up a timing light, a basic one with no read out or anything( i am strapped fo cash), and i was wondering hwo to do my timing, i read you need to unplug a sensor, the service jack or something to do this. I searched but didnt find any write-ups on how to do simple timing on a d-series engine, any help would be much appreciated

 

you are supposed to short the service connector... refer to the stickied thread "ECU Codes for Everyone" on where and how to do this.

 

k thanks

 

one more qeustion how do i know when it is at the correct timing isnt the 3 lines supposed to be at 11 o'clock or something?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Soccerking3000 &raquo;</TD></TR><TR><TD CLASS="quote">one more qeustion how do i know when it is at the correct timing isnt the 3 lines supposed to be at 11 o'clock or something?</TD></TR></TABLE>

http://www.c-speedracing.com/h...g.php

 

okay i just went to find the little service connector and i cant find it anywhere, is there anthing else i can jump or anything?

 

the only one that is down there is a blue connector with a green and brown wire is thta it?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Soccerking3000 &raquo;</TD></TR><TR><TD CLASS="quote">the only one that is down there is a blue connector with a green and brown wire is thta it?</TD></TR></TABLE>

https://honda-tech.com/zerothread?id=825725

 

thank you very much guys