cp piston owners

Reply Subscribe

Thread Tools

Search this Thread

Jul 10, 2004 | 05:44 AM

EKB18BPR3

Thread Starter

Joined: Jun 2002

Posts: 1,823

Likes: 0

From: MN or Cali, depends which office Im at

cp piston owners

did ur rings including both compression rings, oil rings and the squigly thingy overlapped when u first got them with ur pistons? all mine do and i think i got the wrong rings with my pistons. the size pistons i got is standard and the rings that came with it has serial # CPN-3209 and the code stamped on the ring says N50. thanx

Jul 10, 2004 | 06:21 AM

B18C1CYA

Honda-Tech Member

Joined: Apr 2003

Posts: 3,751

Likes: 1

From: Ny,NY

Re: cp piston owners (98B00STED)

you should im earl , he is the cp man

Jul 10, 2004 | 07:10 AM

Rod.

Honda-Tech Member

Joined: Mar 2003

Posts: 4,151

Likes: 0

From: TX

Re: cp piston owners (B18C1CYA)

earl

Jul 10, 2004 | 07:17 AM

EKB18BPR3

Thread Starter

Joined: Jun 2002

Posts: 1,823

Likes: 0

From: MN or Cali, depends which office Im at

Re: cp piston owners (redturbocivic)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redturbocivic »</TD></TR><TR><TD CLASS="quote">earl</TD></TR></TABLE>

ok ill do

Jul 10, 2004 | 08:30 AM

earl

Honda-Tech Member

Joined: Jun 2001

Posts: 8,120

Likes: 3

From: Irvine, CA, usa

Re: cp piston owners (98B00STED)

Those rings are for an 81.5mm bore. What is the part number of the pistons? If you have a stock bore, you got the wrong rings and they must be exchanged. Do not try to cut them to size. Where did you buy them?

Jul 10, 2004 | 04:17 PM

EKB18BPR3

Thread Starter

Joined: Jun 2002

Posts: 1,823

Likes: 0

From: MN or Cali, depends which office Im at

Re: cp piston owners (earl)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by earl »</TD></TR><TR><TD CLASS="quote">Those rings are for an 81.5mm bore. What is the part number of the pistons? If you have a stock bore, you got the wrong rings and they must be exchanged. Do not try to cut them to size. Where did you buy them?</TD></TR></TABLE>

i bought them from Extremepowerouter on ebay but he sells them on HT.com too. and i just emailed him with what u just said. the pistons are the correct size because i used it to slide the rings down the cylinder to measure the gap.