not workingthe temp gauge doesnt work after swapping the clutch...thought i had crossed the connection with the Reverse wire from the trans as theyre both yellow so i switched em...the temp goes straight to hot when i make reverse so i know its not that ..theyre no codes the fans even come on after a while .

any suggestions???

91 XSI


Modified by dashway at 7:03 PM 6/20/2004

 

ECT is a thermistor, resistance drops as temperature increases. If your temp is always at full hot, sounds like you've got a short to ground somewhere from the wire at the connector to the ECU. Good luck.