We are installing a custom turbo kit on a '89 CRX with a B18A engine. We have a
Vortech FMU but no lines for the return from engine to FMU then FMU to fuel tank. Does anyone make Honda style fuel lines or am I going to have to get some compression style fittings and hose and make my own? Thanks,

Cody B

 

get two barbed fitting for the fmu and run the stock return off of the fpr to middle bottom fitting on the fmu and run an entirely new piece of fuel line from the bottom of the fpr to the left fitting on the bottom of the fmu hope that clears it all up

 

thanks for the quick response. wish I had more honda related questions b/c advice here comes much easier and faster than most forums.

Cody