Whats is the max boost with stock sensor + hondata
Honda-Tech Member
Joined: May 2002
Posts: 3,448
Likes: 0
From: Illanoise, USA
Re: Whats is the max boost with stock mapsensor + hondata (vtec.dc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtec.dc2 »</TD></TR><TR><TD CLASS="quote">what happens if you run it at 11psi which is max but don't go over?</TD></TR></TABLE>
OK, the stock Map sensor will read ~11lbs. You CAN run more if you want. How? just richen up the last part of the Hondata Map (Or any standalone fuel Map) for the appropriate amount of boost. I don't recommend going much higher than 11. I run 13 on mine with no problems. I was just too lazy to install the 3 bar and retune again so I just did it that way until the motor went in.
OK, the stock Map sensor will read ~11lbs. You CAN run more if you want. How? just richen up the last part of the Hondata Map (Or any standalone fuel Map) for the appropriate amount of boost. I don't recommend going much higher than 11. I run 13 on mine with no problems. I was just too lazy to install the 3 bar and retune again so I just did it that way until the motor went in.
Thread Starter
Honda-Tech Member
Joined: Aug 2002
Posts: 6,112
Likes: 0
Re: Whats is the max boost with stock mapsensor + hondata (ladysman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ladysman »</TD></TR><TR><TD CLASS="quote">
OK, the stock Map sensor will read ~11lbs. You CAN run more if you want. How? just richen up the last part of the Hondata Map (Or any standalone fuel Map) for the appropriate amount of boost. I don't recommend going much higher than 11. I run 13 on mine with no problems. I was just too lazy to install the 3 bar and retune again so I just did it that way until the motor went in. </TD></TR></TABLE>
i see, i guess i'll just stick at 10psi for now, that one psi isn't worth it.. i'll just get 3bar once i get it retuned.
OK, the stock Map sensor will read ~11lbs. You CAN run more if you want. How? just richen up the last part of the Hondata Map (Or any standalone fuel Map) for the appropriate amount of boost. I don't recommend going much higher than 11. I run 13 on mine with no problems. I was just too lazy to install the 3 bar and retune again so I just did it that way until the motor went in.
</TD></TR></TABLE>i see, i guess i'll just stick at 10psi for now, that one psi isn't worth it.. i'll just get 3bar once i get it retuned.
Thread
Thread Starter
Forum
Replies
Last Post
Tofurky
Forced Induction
20
Feb 24, 2019 06:09 AM
Kidd_Stylez
Forced Induction
10
Nov 2, 2004 04:14 PM
