wil a tial 35/38mm wastgate support 400-450whp??

 

Yes. More so for the 38mm.

 

Either of those wg's will be fine. Remember, one of the main factors you want to base your wastegate size on is how much exhaust gas you will need to bypass the turbine (how much boost you want to bleed off more or less).

 

Yeah it's more a question of the spring and the amount of exhaust gasses size of motor. Also size of turbo. Either one will be fine though.

 

Piece of cake

Inline Pro's 9 second car used a 35mm Turbosmart Wastegate which is almost the same thing as the Tial

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ben@importparts.com &raquo;</TD></TR><TR><TD CLASS="quote">Yes. More so for the 38mm.</TD></TR></TABLE>

Whups, more boost, equals less Wastegate needed. (Because you're bleeding off LESS boost)

-PHiZ

 

thanks for the info. i was afraid i was going to have to buy something bigger. i already dropped ALOT of money. now trying to save to finish the project

 

your quest is over!

I can beat all verifiable legit prices on all Tial products!
I do not charge more for colors or different springs.
I include a free BOV flange in your choice of steel or aluminum with the purchase of BOVs!

Paypal is 3% more, or I actually lose money (thats how cheap my prices are!)


Randy





Modified by Mochanic at 11:47 PM 12/11/2003

 

My friend runs a 35 turbosmart, i like it.
Ya more boost means less WG. ironicly most stock turbos have little internal gates, obviously for cost reasons otherwise your moms volvo 850 would have a huge external hanging off the manifold

 

Go for it, it'll hold