hey i am about to install my 440cc dsm injectors..... do i use a certain size dremmel bit?

 

Its 450cc and for what? If its the o-ring that goes in the manifold use the round wheels all you need to take off is a little bit

 

use the sanding wheel...the hard one not the slip on cover one, size just need to fit inside the plastic ring

go slow and constantly check to see how much more you have to do, shouldnt force it on but shouldnt be loose

make sure you do it evenly and dont melt anything
if it starts to get hot, put it down and go the next the next, and so on

 

maybe I'm crazy but I just test fitted my 450s into the seals from the D15 manifold sitting in my basment and with a little force they slide in...no dremeling needed! am I hallucinating?? LOL

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DA-MAX &raquo;</TD></TR><TR><TD CLASS="quote">maybe I'm crazy but I just test fitted my 450s into the seals from the D15 manifold sitting in my basment and with a little force they slide in...no dremeling needed! am I hallucinating?? LOL</TD></TR></TABLE>

I put a little vaseline on the o rings to assist, but that's it for me, too. **** shaving them down!