Is it also known as the "4 way joint assy."? Is it within #28, specifically #30, in the schematic? Called two local Acura parts stores and they dont know what I'm talking about. I work in a parts dept. too and know what terminology to use.

 

no, i don't think so.

 

Never heard it called by anything other than a prop valve.

 

That looks like a brake line setup with ABS. I don't think that has a prop valve.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Marauder &raquo;</TD></TR><TR><TD CLASS="quote">That looks like a brake line setup with ABS. I don't think that has a prop valve.</TD></TR></TABLE>

What he said, you need the prop valve off a NON-ABS system. I'm assuming you are doing this for a rear disc conversion, you'll be wanting the 40/40.

 

Is it number 5 in this schematic? I know about the 40/40 nickname but the guys in the parts dept. have no idea what that means. This is from a 95 RS. That works right?

 

#5 looks like it could be it. I'd say go ahead and have them order it up for you, then check it for the 4040 stamp before paying. If it isnt the part, apologize and try again. FYI, you can get them for like 40-50 used, not sure what the stealership wants.

 

correct thats the proportioning valve.

"005 46210-ST7-003 VALVE ASSY. 1 1994 Acura INTEGRA 161.17 128.94" - this site you go the pic from.

damn just go to ebay i got my prop. valve for $15 shipped

 

Thanks for the help. I will look for it used since cost plus 10% is still $105.00.

 

Got one from a 2000 Si, If you need it quick I can ship it express mail today. 50 Bucks shipped and its yours, If you're intersed just send a paypal payment to moises357533@aol.com

 

the the cars with the rear discs are 40/40... what do the cars with drums have?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSVTECoupe &raquo;</TD></TR><TR><TD CLASS="quote">what do the cars with drums have?</TD></TR></TABLE>

30/30

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Slammed Si &raquo;</TD></TR><TR><TD CLASS="quote">Got one from a 2000 Si, If you need it quick I can ship it express mail today. 50 Bucks shipped and its yours, If you're intersed just send a paypal payment to moises357533@aol.com</TD></TR></TABLE>

Is that one the same one since its non-abs and 4 wheel disc?

 

I've also heard it called "metering block"