I want to hit 210 WHP on a b16 sleeved to 1.8 liters. The idea is to have a oversquare (or is it undersquare?) engine, F1 style thats very rev friendly and streetable. Who has experience with this type of setup? I would keep it streetable, 11.5 CR, a nice header (DTR, Header-tech or SMSP) and Jun3's.

 

Hmm.... i was thinking of building a 1.6 bored to 1.8 and putting a vortech on it...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mentat Ghola &raquo;</TD></TR><TR><TD CLASS="quote">I want to hit 210 WHP on a b16 sleeved to 1.8 liters. The idea is to have a oversquare (or is it undersquare?) engine, F1 style thats very rev friendly and streetable. Who has experience with this type of setup? I would keep it streetable, 11.5 CR, a nice header (DTR, Header-tech or SMSP) and Jun3's.</TD></TR></TABLE>

that would be a sick sleeper motor

 

Do it. I'll be doing a 1.7L b16a...

 

I am doing the 1.7 b16a combo right now and will let you know in about a month when the whole car is done.

 

Ill keep an eye on Omnimans 200 WHP b16 build. If i just copy that, 210-215 WHP should be attainable.

 

I was going to do a 1.75L B16A. Doing a 1.85L B17A now.

 

well...it just so happens that i bolted my B16 86mm bore in the del sol earlier this evening...should be starting her up tomorrow....I'll let ya know how she does. I've got full skunk valve train stage 2 cams, ITR head p&p'd by portflow. GEM 86mm sleeves. Eagle rods, Endyn 12.5:1 pistons......needless to say i think i'll have some fun with her!

 

DAHM!!! 86 mm sleeves??? I though 85 was like the limit. Is 86 streetable?

 

yeah...GEM can do up to 87mm but I didn't want to run that thin of walls so I did the 86mm..It should run a bit hotter but I have a Fluidyne Radiator and a fal fan along with a huge *** oil cooler so hopefully it'll be ok.

 

Ive nevr heard of GEM sleeves. How much to get 86mm sleeved?

 

GEM=golden eagle manufacturing..should range between 750-1000 bucks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mentat Ghola &raquo;</TD></TR><TR><TD CLASS="quote">Ill keep an eye on Omnimans 200 WHP b16 build. If i just copy that, 210-215 WHP should be attainable.</TD></TR></TABLE>

where can info on his build up be attained?

 

I payed $1440 for sleaves and pistons...it's a bit more than normal sleeves b/c they have to use a bigger sleave for 86 and 87mm bores.....least thats what they told me...