A friend of my has a 95 civic vti (he's in Brazil) They come stock with a b16 motor. He told me that his car has 295 hp at the motor (around 240-250). IS that possible? I know he spent about $6k on it. He has no nitous oxide. I know the head was worked, he problalby has high c/r pistions. He has dc headers and exhaust. I dont know much about his car. I dont think it has that much. Is possile?

Thanks

 

With FI, it`s totally possible. Just depends on the mods though. He`s probably bullshitting you haha

 

1.6L
250whp. No FI...

Not possible with the current state of technology in honda's..the biggest baddest 1.6's make 220whp and cost about $8-10,000 to produce.

 

he's not making that power if he isn't boosted......

but from what you said it sounds like he is all motor and there is no way he making even 200whp ! especially with a DC header !!

 

That's was what i told him, but kept on arguing with me. Here is some pic of his car, the site in portuguese, so just click on the thumbnails.

Thanks

http://www.zeroacem.com.br

 

and a stock intake manifold? hardly....

 

he's probably doing the old guess it HP...

Stock = 160hp
header = 30hp
exhaust = 30-40hp
intake = 20-30hp

see i'm already to 260hp with just I/H/E... hahaha

 

He said he took the car to a dyno. I want to get as much replies and possible, and then im gonna send him this thread. I want to see his reaction.

 

he could have had the block sleeved and be running high compression 84+mm pistons and be around 220whp+
And at $6000 in mods you had better figure out what they are...
Sleeved B16, aftermarket pistons+rods, JUN III cams and valvetrain, plus headwork? ....there's $6000 right there and can be close to what he is bragging about (as long as it is sleeved to get a 84+ mm cylinder bore)

 

Prostreetimport had b16's in the 230's without deck plates

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brryder &raquo;</TD></TR><TR><TD CLASS="quote">He said he took the car to a dyno. I want to get as much replies and possible, and then im gonna send him this thread. I want to see his reaction. </TD></TR></TABLE>

then tell him send you the dyno

 

lol, 250 hp b16 w/ a DC header. I don't think so.

 

I could make 250whp N/A out of a block that said B16A on the front of it. That will be about the only thing B16 about it though.

 

you could use the b16 head casting too

 

i wanna go to that dyno after i get the powered by honda banner on my car...then i'll start makin some real power

 

theres no way he can make that much with a stock b16 IM and a DC header , im not even making 250whp , with some Aems management system i may get close .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brryder &raquo;</TD></TR><TR><TD CLASS="quote">A friend of my has a 95 civic vti (he's in Brazil) They come stock with a b16 motor. He told me that his car has 295 hp at the motor (around 240-250). IS that possible? I know he spent about $6k on it. He has no nitous oxide. I know the head was worked, he problalby has high c/r pistions. He has dc headers and exhaust. I dont know much about his car. I dont think it has that much. Is possile?

Thanks</TD></TR></TABLE>

If this for real ,EricksRacing, Jun japan, Spoon etc .probably will learn a lot from your friend
BS

 

may be it was a typo. 195?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TwoRedEGgs &raquo;</TD></TR><TR><TD CLASS="quote">there is no way he making even 200whp ! especially with a DC header !!</TD></TR></TABLE>

 

honestly, that motor could have major internal work. 86mm bore, jun III's, 12.5:1 Cr, and it still wouldn't have 250whp. Impossible, especially with the stock intake manifold and a crappy dc hedaer. Your friend is living in fantasy land.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MaxBoost &raquo;</TD></TR><TR><TD CLASS="quote">Your friend is living in fantasy land.</TD></TR></TABLE>
They abolished that name a few months ago. Aparently its not 'politically correct'. Now they just call it Full of **** Ricer Land.

 

If he has that much HP then my integra that has been broken since April will fix the broken transmission it has tonight.

Cliff note: You seen the movie Big Fat Liar? Well that is your friend!!

 

i bet you the dyno in brazil was out of calibration. for example...the with the wheels on the dyno not even rolling, the car's already pushing 20 hp. hehe