I am swapping a b18c into my 97 dx and we are having a problem lining up the mounts. Is there any tricks to it? Also to make sure, can i use the dx tranny side mount?

 

bolt the rear mount in first, then use a jack under the tranny to lift the motor up or down and line up the other two mounts. I recently put the polyurethane inserts into my mounts and that was a bitch to line em all up. good luck. PJ

 

YES YES YES rear tranny mount first

its IMPOSSIBLE to get it in, once the other mounts are on.

 

Ok thanks for the help we will try that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by txhatch &raquo;</TD></TR><TR><TD CLASS="quote">I am swapping a b18c into my 97 dx and we are having a problem lining up the mounts. Is there any tricks to it? Also to make sure, can i use the dx tranny side mount?</TD></TR></TABLE>

you have to get an EX or SI driverside engine mount
and SI L bracket

 

NO

you need B series mounts. integra GSR, civic SI (99-00), del slow vtec

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShowTymers619 &raquo;</TD></TR><TR><TD CLASS="quote">

you have to get an EX or SI driverside engine mount
and SI L bracket
</TD></TR></TABLE>

I already know that and have them.