Ok im goin to put my boost controller on my new car, so bottom hose on wastegate goes to turbo compressor , The top side goes to my valve unit outlet, but the inlet to the valve unit comes from between the turbo and throttle body. Im using a drag 3 kit on my teg, do I have to drill a fitting into my turbo pipe to run to my boost controller valve unit????

 

 

Yeah. DOnt forget to run that skinny black line also

 

????
Answer me , do i have to tap a vacuum into my turbo pipe???

 

"IN" comes from the turbo port/or vacuum source
"OUT" needs to go to the top port of the wastegate
side port of the wastegaete goes to the turbo/or vacuum source

so u can splice the "IN" port of the box and side port of the wastegate cause it needs to get the same reading. am i making sense?

 

Yes you have to tap into your pipes

 

So the vacuum on the bottom side of the tial wastegate connects to the turbo(drag 3 kit) I see no vacuums connections on my turbo?? From that hose i can tap it for my inlet on my boost controller since that supposedly comes from the intake side of the turbo.

 

You might not have any. When I hooked mine up i used seperate taps cause when we had it tee off the same tap it spiked. Try it we probaly had to play withe the gains but didnt bother too. The hose coming from the turbo went into the bottom of the wastegate and we drilled a tap into the the pipe connecting to the tb and put that to the inlet.