What kind of hp+tq #'s on built b16s at around 18psi? is 400 out of reach?
Thread Starter
Honda-Tech Member
Joined: Mar 2003
Posts: 579
Likes: 0
From: Bear, DE, 19701
What kind of hp+tq #'s on built b16s at around 18psi? is 400 out of reach?
Got two B16 blocks and would be alot easier to build one of those then waste all the money on a gsr. Just looking for opinions can I make good power?
New User
Joined: Mar 2001
Posts: 12,296
Likes: 0
Re: What kind of hp+tq #'s on built b16s at around 18psi? is 400 out of reach? (Spooled1.6L)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Spooled1.6L »</TD></TR><TR><TD CLASS="quote">Got two B16 blocks and would be alot easier to build one of those then waste all the money on a gsr. Just looking for opinions can I make good power?</TD></TR></TABLE>
Perfectly attainable! I made 370whp 276 ft-lb torque with a DRAG 3 kit at 21psi ut this was a small *** turbo! I made 370whp with only 12psi with my new set up Full Race mani and T3/60-1 before the GE sleeves sunk so I am on a new set up. WIll post the results soon. But again it is very easily attainable , BIG turbo and high boost and you will get that easy. If we were able to tune further I expect approx 75whp with 6 more psi so that is mid 400whp #s.
Modified by Boostfed at 9:52 AM 7/23/2003
Perfectly attainable! I made 370whp 276 ft-lb torque with a DRAG 3 kit at 21psi ut this was a small *** turbo! I made 370whp with only 12psi with my new set up Full Race mani and T3/60-1 before the GE sleeves sunk so I am on a new set up. WIll post the results soon. But again it is very easily attainable , BIG turbo and high boost and you will get that easy. If we were able to tune further I expect approx 75whp with 6 more psi so that is mid 400whp #s.
Modified by Boostfed at 9:52 AM 7/23/2003
Honda-Tech Member
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Re: What kind of hp+tq #'s on built b16s at around 18psi? is 400 out of reach? (Spooled1.6L)
I'm shooting for 475whp with my B16a. One of the only things holding me back is my rods (waiting on them). After that I hope to be done before next season (NOPI, NHRA, etc.).
New User
Joined: Mar 2001
Posts: 12,296
Likes: 0
Re: What kind of hp+tq #'s on built b16s at around 18psi? is 400 out of reach? (quickda6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quickda6 »</TD></TR><TR><TD CLASS="quote">bump for brad</TD></TR></TABLE>
max_cfm? eah Brad is a good guy who knows his stuff and has made some impressive #s with the set ups he has built all motor and turbo.
I am sending a head to him to p&p for an All motor set up I am building.
max_cfm? eah Brad is a good guy who knows his stuff and has made some impressive #s with the set ups he has built all motor and turbo.
I am sending a head to him to p&p for an All motor set up I am building.
Thread
Thread Starter
Forum
Replies
Last Post
Slammed Civic Si
Forced Induction
6
May 29, 2008 04:51 PM