What is your rev limit and VTEC set at. Do you have any problems staying in VTEC on shifts?

 

I have a B16 with a GSR tranny. Chipped p28 with mugen program. VTEC at 5700, Rev limit at 8000(stock valve springs and cams).

I fall out of VTEC at every shift. I usually land at about 53-5500 every time I shift at 7900. My tachs off by a 200 rpm so it's kinda hard to tell exactly where I land. If you are running stock GSR cams, get something with the VTEC down at about 4500.

 

vtec is stock rev limit 8500 rpm. and no