i can get a brandnew ported big 16g turbo for a good price and was wondering if anyone knows where I could get a manifold for it or if I'mt going to have to go custom with it.

 

i beleive it will bolt to the greddy manifold, but not 100 percent sure

 

I thik it will too. hows it going Speedworks guess who

 

so will is just say "16g flange" ?

 

the greddy kit has a TD05H-18G turbo, so would the TD05H-16G bolt up to that?

 

i am prettysure it will bolt right up. They are both td05 flanges so it should bolt right on to the manifold.

 

yeah, been doing more reading, a TD05H-18G and a TD05H-16G are the same turbo just have different wheels. so same exhaust housing, same manifold, time to haul ***, yay.

 

Do more research. The Mitsubishi Exhaust housing will not bolt up to a Greddy Manifold. The Greddy Manifold has a standard Garrett T25 flange, as used in nissans. Similar to a T3, only smaller. Very different from the MHI turbo flange. A Greddy-built TD05H-18G for the GS-R/Civic Si kit has a completely different exhaust housing. Find pics, but I warn you not to buy the combo in hopes of bolting them together. Your options are, if you want that turbo, custom manifold, or any manifold you want and an adapter plate. HTH.

 

well damn.