Well as some of you know I blew something about a month ago at the dyno. Well we pulled the head today (mad props to hondatec38 and his boy Joey) for helpin me out and doing it under 2hrs. After we pulled the head I saw alot of ugliness. One of the pistons melted and one had a small chip in it. Cylinder walls were scored but they will be salvageable. So Instead of sleeving and doing a full build up which I have no money for right now. I am just going to buy some forged pistons, new rod bearings, use stock rods, and get the car running again until I can afford a total build up. Thanks to everyone on the FI forum for giving me support to not sell this thing. I will keep everyone updated on the progress.

Cliff Notes: Pulled head saw bad things -Melted piston -scored cylinder walls -Gonna get new pistons.

 

Man. I see some hardcore warriors here on HondaTech. Good luck and

 

Glad to hear that no matter how bad things get as long as you have Honda-Tech everything is fixable.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 &raquo;</TD></TR><TR><TD CLASS="quote">Man. I see some hardcore warriors here on HondaTech. Good luck and </TD></TR></TABLE>

Thanks guys. If I didnt have all the honda-tech FI guys I know I wouldn't be driving my car.

 

thanks for the props buddy.

 

we pulled my buddys head and we didnt think it blew the headgasket when we looked at it but we installed a new one and its fine now... so it was the headgasket in our case. good luck