I am in hopes of getting a 94-96 integra Ls, I am also in hopes of dropping some sort of turbo in it. I do not know much about turbos, so I come to the good people of honda tech for answers . What would be the most efficient turbo, I guess I want it to spool at roughly 4000 rpms and be capable of delivering around 200-250 whp. Once again, I don't know much. Any suggestions would be well appreciated, Thanks.

Steve


AIM screen name BlankEnsOmnIac

 

go with a t3/t04e 60 trim turbo with .63ar.from cheapturbo.com

 

How bout a turbo that spools at 2700 and puts down over 250 on 10psi? It sounds crazy especially on a board with such a fetish for the t3/t4 but the Apexi kit for the SOHC works awsome on an LS. It's like a little truck. I would never "upgrade" to a t3/t4 to run anything less than 14psi.

 

Get a Precision Turbo and do it right the first time. That way when you want 350whp you dont need a new turbo. the sc50 will spool by 4k no problem and will support 350whp.

 

garret T3/T04e 57 trim w/ stage 3 .63ar would probably be perfect for u. or a precision SC34.

made 250whp @ 10psi on my LS turbo. started spooling 3000 and had full boost(10psi) at 4000. doesn't seem laggy at all and pulls past redline.

 

im planning on going with a T3 a/r of .60-.63

it all depends where you want your power on the rpm range