how can i pass emission? i have a 94 civic with a b16 and a chipped p28 , and im running to rish to pass so should i get a stock p28? or what should i do , i know about the apexi safs but i dont wann get that at the moment so any suggetions please

 

first due a tune up on the motor. ie. timing, new rotor/cap/plus/plug wires (if required), new PCV valve, cleaned up 02 sensor
also clean around the TB area.

then yes use a stock P28 or even P06 (no need for vtec during emissions anyways)

 

i bought some ish at auto zone, its called Berrymans Guaranteed to Pass, it lowered my HC (hydro carbon) from 311 to 198 it was night and day difference. i passed with flying colors after that ish went through my gas tank.

 

isn't that stuff an octane lowerer? anyways, are u also running the rest of the jdm set up besides the motor? if the mechanic knows what he's doing, u won't pass visual cuz it's not the factory motor. welcome to my world.\

*edit - that is...if u live in california*


[Modified by edrop27, 2:44 PM 1/9/2003]
*edit - which u don't...so u should do okay. get that octane lowerer and make sure ur car warms up nice n hot cuz the cat won't do it's job unless the car is warmed well*


[Modified by edrop27, 2:45 PM 1/9/2003]

 

ok i passed with a stock p28 thanks

 

why did you double post?
https://honda-tech.com/zerothread?id=380201