When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just bought this DX hatch for a towing bill of $50 basically and got all this cool stuff with it including this b18b1 pictured below. What all do i need to be able to get the b18b1 in it? its has a D16y7 in the car now with a slung rod and hole in the block. I dont wont to put anther D series in it. Ive never had a b series and love to get it gong.
listed below are the major things i have:
B18b1 with la trans
P75ecu
Wiring harness from the teg it cam out of
engine and trans mounts
shift linkages.
What else would I need to finish this out besides trans axles?
Last edited by Mr. Machinist; Feb 21, 2019 at 12:06 PM.
Reason: Didn't make any sense the first time. Wrong sub model
i bought the hatch with a blown d16 in it. He gave me the b18b1 with the shift linkages, computer, wiring harness, and months. What else do I need to be able to put it in the car and go.
start with sourcing the missing bits on that b18b.
i believe i have all the missing parts besides the axles there just in a box. I have the starter, distributor, and i think most of the stuff that goes with the engine.
for realz man, all info are needed in a tech post. DETAILS PLEASE.
I have a B18B1 with an ls transmission. I want to put it in my 1995 EG hatch i just got. The hatch has a D series engine in it. I have the motor and transmission mounts for the engine, I also have the shift linkages for the b18, computer(p75), header for the B series. it also came with the b series wiring harness. How do i put the b series in the EG. Is it just plug and play or do i have to change everything. I believe everything is OBD1
I have a B18B1 with an ls transmission. I want to put it in my 1995 EG hatch i just got. The hatch has a D series engine in it. I have the motor and transmission mounts for the engine, I also have the shift linkages for the b18, computer(p75), header for the B series. it also came with the b series wiring harness. How do i put the b series in the EG. Is it just plug and play or do i have to change everything. I believe everything is OBD1
Originally Posted by TomCat39
On google, try "site:honda-tech.com b series swap eg" without the quotes.
This will net you a ton of threads covering your exact desire and you will find out all kinds of little things that need attention for this swap.
It's been done so many times so is well documented.
My apologies guys. I realize why I couldn’t find anything on my Hatchback. It is not a EG like I was told. It is either a CX/DX and now I have found butt loads of stuff. Thank you everybody!
If it's a 92-95 hatchback it doesn't matter if it's CX/DX/EX or Si, it's considered the EG chassis.
In Canada it's actually EH2 but still everyone references it as the EG for the 5th gen hatchback.
Reason being, in Japan it was EG6 for the 5th gen hatchback with the tail gate rear end.
So, most all searches revolve around EG if you want to talk about the 92-95 Hatchback chassis.
If it's a 92-95 hatchback it doesn't matter if it's CX/DX/EX or Si, it's considered the EG chassis.
In Canada it's actually EH2 but still everyone references it as the EG for the 5th gen hatchback.
Reason being, in Japan it was EG6 for the 5th gen hatchback with the tail gate rear end.
So, most all searches revolve around EG if you want to talk about the 92-95 Hatchback chassis.
yea I just read that right before coming here this morning. I was trying to find exact specifics before attempting it.
95 DX hatchback D series to b18b1 LS
