Tech question

Reply Subscribe

Thread Tools

Search this Thread

Dec 29, 2013 | 12:24 PM

1native

Thread Starter

Honda-Tech Member

Joined: Oct 2013

Posts: 27

Likes: 0

Tech question

I have an 96 accord . I have an built head and an h22a block I want to use I also have the step down harness . For the ecu . Will this work in the car .i know there will be some sensor plugs not used .

Dec 29, 2013 | 12:24 PM

1native

Thread Starter

Honda-Tech Member

Joined: Oct 2013

Posts: 27

Likes: 0

Re: Tech question

I may not be explaining it correctly .

Dec 29, 2013 | 02:24 PM

ej7attack

Honda-Tech Member

Joined: Nov 2012

Posts: 495

Likes: 0

From: central ohio

Re: Tech question

you have obd2 car with a motor you probably want to run obd1 so you will need an obd conversion harness.

Dec 29, 2013 | 04:14 PM

1native

Thread Starter

Honda-Tech Member

Joined: Oct 2013

Posts: 27

Likes: 0

Re: Tech question

Yes I have an obd1 motor and chipped p28 and an obd2 car .i do have an obd 2 to 1 harness .am I gonna run Any codes

Dec 29, 2013 | 07:23 PM

MAD_MIKE

MM Gruppe B

Joined: Feb 2009

Posts: 7,027

Likes: 109

From: 94577/Gaillimh

Re: Tech question

If you have the correctly chipped P28, correct conversion harness(with modifications for use of H22 in Accord), and all the sensors hooked up you should have no problems.