Hey guys check my set up and track times....
Hey guys heres a list of my set up let me know what you think:
B18a Block sleeved by Golden Eagle
Bored 120 over to make it a 2.0L
JE pistons 9:1 CR
Crower rods
Gsr oil pump replaced w/ Prodrive oil pump gear
ARP head studs
Cometic head gasket
Port & polished head
Ferrea oversized valves
Crower dual valve springs
Crower titanium retainers
stock cams
Greddy 720cc injectors
AEM fuel rail
NOS fuel pressure regulator
Garrett T3 (stage 3, .63ar) T4e (.57 trim, .60 ar)
Stainless equal length manifold (same one Sav uses from Impo)
3" downpipe custome done by me
Drag 3 intercooler
I/C piping, 2" from turbo to i/c and 2 1/2" from i/c to intake mani
Tial 40mm wastegate (.65 bar spring)
Tial 50mm blow off valve
Zdyne gold ecu
3 bar Map sensor
Mobile 1 synthetic motor oil
-4AN oil feed stainless & -10AN oil return
OK as far as time slips go, I was at the Maple Grove IDRC on Sunday and this is the fastest of four runs.
R/T ... .823
60' ... 2.269
330 ... 5.862
1/8 ... 8.724
mph ... 85.55
1000 ... 11.176
1/4 ... 13.242
mph ... 108.17
this was on Fualken Azenis @ .65 bar and with a 2 1/4" exhaust. I am very pleased with the results thus far and I have a lot of things on a wish list i.e. 3" exhaust, better intake mani, DSS stage 3, and slicks!!! I noticed that my car loses power from 6000-8000 rpms b/c I assume the exhaust. I went out tuning w/ my friend last night w/an open DP and it feels so much faster. thanks Honda-tech for all the help, Evan
[Modified by AGen2integra, 11:17 PM 10/24/2002]
B18a Block sleeved by Golden Eagle
Bored 120 over to make it a 2.0L
JE pistons 9:1 CR
Crower rods
Gsr oil pump replaced w/ Prodrive oil pump gear
ARP head studs
Cometic head gasket
Port & polished head
Ferrea oversized valves
Crower dual valve springs
Crower titanium retainers
stock cams
Greddy 720cc injectors
AEM fuel rail
NOS fuel pressure regulator
Garrett T3 (stage 3, .63ar) T4e (.57 trim, .60 ar)
Stainless equal length manifold (same one Sav uses from Impo)
3" downpipe custome done by me
Drag 3 intercooler
I/C piping, 2" from turbo to i/c and 2 1/2" from i/c to intake mani
Tial 40mm wastegate (.65 bar spring)
Tial 50mm blow off valve
Zdyne gold ecu
3 bar Map sensor
Mobile 1 synthetic motor oil
-4AN oil feed stainless & -10AN oil return
OK as far as time slips go, I was at the Maple Grove IDRC on Sunday and this is the fastest of four runs.
R/T ... .823
60' ... 2.269
330 ... 5.862
1/8 ... 8.724
mph ... 85.55
1000 ... 11.176
1/4 ... 13.242
mph ... 108.17
this was on Fualken Azenis @ .65 bar and with a 2 1/4" exhaust. I am very pleased with the results thus far and I have a lot of things on a wish list i.e. 3" exhaust, better intake mani, DSS stage 3, and slicks!!! I noticed that my car loses power from 6000-8000 rpms b/c I assume the exhaust. I went out tuning w/ my friend last night w/an open DP and it feels so much faster. thanks Honda-tech for all the help, Evan
[Modified by AGen2integra, 11:17 PM 10/24/2002]
You definitely need to get slicks. That will drop your time a lot. Thats a good time for street tires though. I never got to see you run. I only saw TJ run and spin his tires down the whole track.
You didn't remember me when I talked to you at Maple Grove, but I talked to you before at Goodnoe's, I was in the beast of a PT cruiser.
You didn't remember me when I talked to you at Maple Grove, but I talked to you before at Goodnoe's, I was in the beast of a PT cruiser.
yeah there is a big problem with your 60' time....u drop that and u should hit 12's from what it looks like
but i can imagine with all the hp u were spinning off the line
but i can imagine with all the hp u were spinning off the line
Trending Topics
Lshatch - Yes I don't remember you talking to me at Maple Grove, when did we talk? Are you going to Etown on the 3rd, most likely I am going and I might use my friends slicks
hes got 24 1/2" x 9" Mickey thompsons........ I.M. me and let me know if you wanna go
hes got 24 1/2" x 9" Mickey thompsons........ I.M. me and let me know if you wanna go
Well at Maple Grove, the only thing I said to you was "don't forget to put your rad cap back on."
I'm the kid that used to have the black EK with the LS motor. Now I have the EG hatch with the b16 in it.
I might go up to E-town on the 3rd depending on how my car is running and what not. I'll have to let you know/
I'm the kid that used to have the black EK with the LS motor. Now I have the EG hatch with the b16 in it.
I might go up to E-town on the 3rd depending on how my car is running and what not. I'll have to let you know/
i got one
this pic is a year old after his trans went. we tore everything out of the engine bay and took the suspension apart. we did energy suspension bushings all around, st sway bars, tockiko 5 ways, camber kits. sorry the pic is the only one he has for now he needs to take a current one. but it looks like this, white 90 teg, 3rd gen ls rims, one peice headlights. hell yeah
this pic is a year old after his trans went. we tore everything out of the engine bay and took the suspension apart. we did energy suspension bushings all around, st sway bars, tockiko 5 ways, camber kits. sorry the pic is the only one he has for now he needs to take a current one. but it looks like this, white 90 teg, 3rd gen ls rims, one peice headlights. hell yeah
here are some funny pictures of him racing ari yallon.
http://www.urbanracer.com/gallery/ga...0&box=&shownew=
http://www.urbanracer.com/gallery/ga...1&box=&shownew=
http://www.urbanracer.com/gallery/ga...2&box=&shownew=
the first pic he is in the backround, the second pic it looks like his car is faster than ari's(because of ari's reaction time), and the last pic he got his *** handed to him
http://www.urbanracer.com/gallery/ga...0&box=&shownew=
http://www.urbanracer.com/gallery/ga...1&box=&shownew=
http://www.urbanracer.com/gallery/ga...2&box=&shownew=
the first pic he is in the backround, the second pic it looks like his car is faster than ari's(because of ari's reaction time), and the last pic he got his *** handed to him
how the hell did you end up racin that guy ? my friend had to go up against kenny tran in the 1st rd of eliminations in pomona , the out come was pretty much the same , he lost .
by the way , nice DA integra
by the way , nice DA integra
Thread
Thread Starter
Forum
Replies
Last Post
dirtyEj1
Texas -OK -LA (Sales)
3
Feb 13, 2007 09:40 PM
AGen2integra
Forced Induction
4
Jul 30, 2002 11:29 PM




Youve done ALOT of mods.

