AZ 95 Integra fully built w/ Turbo kit
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 87
Likes: 0
From: glendale, arizona, usa
640 hp 95 Integra fully built w/ Turbo kit
Up for sale is my weekend warrior this car only hits the streets 2 days a week at the most.Although it is a reliable car that i would not hesitate driving it daily.The car has a CLEAN title.This car makes 640whp and 451tq @ 22psi on a dynapack dyno,tuned by Tim at xact dyno on a 110 degree day on vp 110 octane race fuel.I also have an E85 tune for 15 psi making 505 whp Both tunes can be emailed to the new owner of this car.This car is extremely FAST and very easy to drive!! This car has 0 issues and does not overheat AT ALL!
PLEASE DONT CALL AND ASK ME QUESTIONS ABOUT THE CAR IF U HAVE NO INTENTIONS ON BUYING IT. READ THIS ENTIRE POST BEFORE YOU CALL, I HAVE COVERED ALL BASES.
Goods:
16" Te37 rep. Brand new tires all the way around 205-40-16 Nitto Neo Gen
Skunk 2 Pro C suspension
S2000 seats
MOMO steering wheel
Hondata s300
Hondata C.P.R. (uses coil packs instead of the week factory ignition setup)
Afco aluminum racing radiator
-4 fuel lines
Walbro 400 lph in tank fuel pump
Ls vtec
Endyn head
supertech valves
Supertech titanium valve springs and retainers
Skunk 2 pro 1 cams
Skunk 2 adjustable cam gears
Jg Edelbrock intake manifold
Bdl 73mm throttle body
Rc 1000cc injectors
Aem fuel rail and fpr
Ls block sleeved with Darton sleeves 84.5mm
Mahle turbo pistons 9:1 compression
Eagle rods with upgraded wrist pins
new Acl race bearings
Micropolished and balanced crank shaft
Gsr tranny no grinds or pop outs
Real Quaife Lsd
Competition stage 5 clutch kit 300 miles on it or less
Competition lightened flywheel
Jdl top mount turbo manifold
Precision billet ball bearing 6262 w/ vband housing
3" aluminum charge piping
Vibrant quick release turbo clamps
Tial 44mm wastegate
Tial 50mm B.o.v.
Mac e.b.c.
full 3" vband exhaust w/magnaflow muffler
Bads: No Ac,
$10,500 or reaonable offer!!
Robin 623-466-2706 call or text anytime
Im in no hurry to sell,.This is a proven setup with dyno sheets to prove it
PLEASE DONT CALL AND ASK ME QUESTIONS ABOUT THE CAR IF U HAVE NO INTENTIONS ON BUYING IT. READ THIS ENTIRE POST BEFORE YOU CALL, I HAVE COVERED ALL BASES.
Goods:
16" Te37 rep. Brand new tires all the way around 205-40-16 Nitto Neo Gen
Skunk 2 Pro C suspension
S2000 seats
MOMO steering wheel
Hondata s300
Hondata C.P.R. (uses coil packs instead of the week factory ignition setup)
Afco aluminum racing radiator
-4 fuel lines
Walbro 400 lph in tank fuel pump
Ls vtec
Endyn head
supertech valves
Supertech titanium valve springs and retainers
Skunk 2 pro 1 cams
Skunk 2 adjustable cam gears
Jg Edelbrock intake manifold
Bdl 73mm throttle body
Rc 1000cc injectors
Aem fuel rail and fpr
Ls block sleeved with Darton sleeves 84.5mm
Mahle turbo pistons 9:1 compression
Eagle rods with upgraded wrist pins
new Acl race bearings
Micropolished and balanced crank shaft
Gsr tranny no grinds or pop outs
Real Quaife Lsd
Competition stage 5 clutch kit 300 miles on it or less
Competition lightened flywheel
Jdl top mount turbo manifold
Precision billet ball bearing 6262 w/ vband housing
3" aluminum charge piping
Vibrant quick release turbo clamps
Tial 44mm wastegate
Tial 50mm B.o.v.
Mac e.b.c.
full 3" vband exhaust w/magnaflow muffler
Bads: No Ac,
$10,500 or reaonable offer!!
Robin 623-466-2706 call or text anytime
Im in no hurry to sell,.This is a proven setup with dyno sheets to prove it
Last edited by spoolinup; Aug 26, 2012 at 04:26 PM.
Re: 95 Integra fully built w/ Turbo kit
Thread
Thread Starter
Forum
Replies
Last Post
GruvyTune
Forced Induction
132
Apr 25, 2003 10:47 AM