i was driving to school one day, when i went to down shift i put the clutch in and there was almost no presure at all. it went into neutral but wouldnt go into gear any more.ended up speed shifting it home with no clutch. me and my buddy got screwing around with it today. it will go into gear when the car is shut off but when you start it it wont. there was still no presure on the clutch pedal so we bleed it a bit and then we got some presure on the clutch pedal but it still wouldnt go into gear. then we ajusted the ajuster on the back of the pedal. after that it wants to go into gear and kinda starts to go a bit almost but still wont go. i got it to go into reverse but it clunked priety good and then started making a funny sound and wouldnt come out of reverse so i had to shut the car off, and we checked the slave cylinder and it seems to be working fine but i could be wrong. the car is a 93 civic si hatch any advise would be well apreciated

 

Most likely the clutch springs.

If slave cylinder rod has full movement, then it will be clutch springs. 94

 

ya im priety sure its the presure plate or the throwout bearing cause i was having some bering wine to