wanting to know if any of you guys know how much power and tq. the pressure plate is rated for on 94-01 integra?

I have a turbo lsvtec motor right now with 300whp/230tq. on the act 6 puck and exedy organic pp, going to up the boost to be around 390-400whp and need a pressure plate to be able to hold that much power and the act HD pp fits my budget, unless you guys can fill me in on some other brand around the same price range that can hold the amount of power/tq. i will be making, dont want it to slip at the track when it's on slicks

 

i think for that fig u must have to put ACT XT pp....HD is meant for 300-350 bhp ....so in order to meet ur gaols on slicks,just go and have XT widout another thought.....

 

herd xtreme does damage to crank and bearings no?

 

see crank..see crank walk.


lol no having a extream pp wont effect your crank/bearings

 

ive had mines for 5 years...drove over 10k on an engine that i just rebuilt and there was no damage on crank..

 

Imo, I would get a ACT sprung 6puck and a heavy duty pressure plate as you asked. I have this setup, my original ACT pressure plate
and disc have been refitted once just cause it was time. Have had no issues with the motor at 19psi from a SC6262 making 474. Damn thing holds all day! and I'm a track noob learning my car all over again at the 1/4, so you can imagine the abuse she takes. ;-)

 

ok got a answer from ryan over at ACT, the said that the ACT HD pressure plate along with a 4 or 6 puck disc will be able to hold 310ft. lbs. of tq. at the crank, so it translates into about 260-270ft. lbs. of tq. to the wheels.

Nailclipper, how much tq. are you making?

 

I made 522whp with 327wtrq on act extreme and 4 puck sprung. Great clutch never slipped lasted a long time and looked new when I took it off and sold it last week

 

I like the xxg6. It's the one that holds 408tq. Never had any slips and I daily drive it for 3yrs.

 

been rockin this setup for 7 years now!

 

anybody else with 350-400whp 250-300tq using the act hd pressure plate/4-6 puck disc on slicks having great success??

 

Sent you a PM.. as well as this link to compare your application to their readings of torque.
http://www2.advancedclutch.com/produ...utch-kits.html

More specifically
http://www2.advancedclutch.com/10003...i_(b18c1).html

 

Rocking the XTG6 here and its been good to me. No slipping ever.

 

shodan, im looking at the AI4-HDR6

 

Check the second link. the information for ft/lbs in there. I'm teaching you to FISH.. Not just giving you one. ;-)

 

I've had mine for bout 5 yrs and no probs. The car made 380tq to the wheels. They hold up great, seems like they are a Lil under rated in my opinion. Get it and don't look back

 

ubber late response sorry. Im making well over 320flbs to the wheels with my act unit and have no problems. even on slicks at the track;-) you get something figured out?

 

yeah Im sure it's gonna be the ACT heavy Duty pressure plate along with the act 6 puck non-sprung disc.

 

heavy duty pp or Xtreme pp??