ACT heavy duty pressure plate?
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2010
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
ACT heavy duty pressure plate?
wanting to know if any of you guys know how much power and tq. the pressure plate is rated for on 94-01 integra?
I have a turbo lsvtec motor right now with 300whp/230tq. on the act 6 puck and exedy organic pp, going to up the boost to be around 390-400whp and need a pressure plate to be able to hold that much power and the act HD pp fits my budget, unless you guys can fill me in on some other brand around the same price range that can hold the amount of power/tq. i will be making, dont want it to slip at the track when it's on slicks
I have a turbo lsvtec motor right now with 300whp/230tq. on the act 6 puck and exedy organic pp, going to up the boost to be around 390-400whp and need a pressure plate to be able to hold that much power and the act HD pp fits my budget, unless you guys can fill me in on some other brand around the same price range that can hold the amount of power/tq. i will be making, dont want it to slip at the track when it's on slicks
#2
Re: ACT heavy duty pressure plate?
i think for that fig u must have to put ACT XT pp....HD is meant for 300-350 bhp ....so in order to meet ur gaols on slicks,just go and have XT widout another thought.....
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2010
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
#6
Re: ACT heavy duty pressure plate?
Imo, I would get a ACT sprung 6puck and a heavy duty pressure plate as you asked. I have this setup, my original ACT pressure plate
and disc have been refitted once just cause it was time. Have had no issues with the motor at 19psi from a SC6262 making 474. Damn thing holds all day! and I'm a track noob learning my car all over again at the 1/4, so you can imagine the abuse she takes. ;-)
and disc have been refitted once just cause it was time. Have had no issues with the motor at 19psi from a SC6262 making 474. Damn thing holds all day! and I'm a track noob learning my car all over again at the 1/4, so you can imagine the abuse she takes. ;-)
#7
Honda-Tech Member
Thread Starter
Join Date: Sep 2010
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Re: ACT heavy duty pressure plate?
ok got a answer from ryan over at ACT, the said that the ACT HD pressure plate along with a 4 or 6 puck disc will be able to hold 310ft. lbs. of tq. at the crank, so it translates into about 260-270ft. lbs. of tq. to the wheels.
Nailclipper, how much tq. are you making?
Nailclipper, how much tq. are you making?
Trending Topics
#8
Honda-Tech Member
Re: ACT heavy duty pressure plate?
I made 522whp with 327wtrq on act extreme and 4 puck sprung. Great clutch never slipped lasted a long time and looked new when I took it off and sold it last week
#10
400 HP Club
Join Date: May 2003
Location: Kills, Canada
Posts: 3,072
Likes: 0
Received 0 Likes
on
0 Posts
#12
Moderator
iTrader: (14)
Re: ACT heavy duty pressure plate?
wanting to know if any of you guys know how much power and tq. the pressure plate is rated for on 94-01 integra?
I have a turbo lsvtec motor right now with 300whp/230tq. on the act 6 puck and exedy organic pp, going to up the boost to be around 390-400whp and need a pressure plate to be able to hold that much power and the act HD pp fits my budget, unless you guys can fill me in on some other brand around the same price range that can hold the amount of power/tq. i will be making, dont want it to slip at the track when it's on slicks
I have a turbo lsvtec motor right now with 300whp/230tq. on the act 6 puck and exedy organic pp, going to up the boost to be around 390-400whp and need a pressure plate to be able to hold that much power and the act HD pp fits my budget, unless you guys can fill me in on some other brand around the same price range that can hold the amount of power/tq. i will be making, dont want it to slip at the track when it's on slicks
http://www2.advancedclutch.com/produ...utch-kits.html
More specifically
http://www2.advancedclutch.com/10003...i_(b18c1).html
#16
Re: ACT heavy duty pressure plate?
I've had mine for bout 5 yrs and no probs. The car made 380tq to the wheels. They hold up great, seems like they are a Lil under rated in my opinion. Get it and don't look back
#17
Re: ACT heavy duty pressure plate?
ok got a answer from ryan over at ACT, the said that the ACT HD pressure plate along with a 4 or 6 puck disc will be able to hold 310ft. lbs. of tq. at the crank, so it translates into about 260-270ft. lbs. of tq. to the wheels.
Nailclipper, how much tq. are you making?
Nailclipper, how much tq. are you making?
#18
Honda-Tech Member
Thread Starter
Join Date: Sep 2010
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Re: ACT heavy duty pressure plate?
yeah Im sure it's gonna be the ACT heavy Duty pressure plate along with the act 6 puck non-sprung disc.
#19
Honda-Tech Member
Thread Starter
Join Date: Sep 2010
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post