my jdm requires 2 o2 scencors but no one makes headers for 2 02 scencors. could i use a single 4 wire o2 scencor in place of the 2 o2 scencors like just run 2 wires to the ecu and either ground the other 2 orjust leave them alone? i need an after market header so i can reinstal my center crossmember.
i want to eliminate haveing to use 2 o2 scencors would splicing the wires that run to the ecu together and just running them to 1 o2 scencer work?


[Modified by bmcc72, 4:58 PM 10/5/2002]


[Modified by bmcc72, 5:00 PM 10/5/2002]


[Modified by bmcc72, 5:04 PM 10/5/2002]

 

to use a 4 wire o2 sensor on a b16a1....
splice the two 1 wire o2 sensors together...
black: splice with the green wire.....
black: goes to a switched power source..
white: goes to the factory 02 plugs....
green: splice with one of the black wires...
i got this from a website i can't find it right now if i do i'll post it up...
my friend got a 4 wire o2 sensor for a integra from kragen and the wire colors were different it was black green and 2 whites.. i'm still waiting on some info so i can do the switch the o2 sensor for him...
http://ludicrous2_0.tripod.com/how_to/oxy/



[Modified by XtraFastCRX, 7:03 AM 10/5/2002]

 

And the green wire needs to be grounded.