how hard is it to tuck an engine harness. is it a harness brought or is it homemade?

 

reaserch its your stock harness the questions you post....

 

This doesn't make any sence.

First, you can do your own harness, or buy a brand new one from chasebay's or rywire. There are other, but these are the best known.

It's not terribly difficult to do it, but you can really **** your day up if your not paying attension.

My freind tucked his whole bay. We are now hunting down the cause of a few sensors not reading, and the most recent, lack of spark.

 

How Long would it take to do and where would i find a diy video on it cause i would lllooovvvveeeee to do it bays that are tucked look so clean.

 

Took 2 of my buddys and my self about a 2 days to do his complete bay. Headlight,engine,etc. This was driving the car in, and driving it out. Dash was pulled, fenders, and more. We also did a s2k mc, and tucked clutch line.

You really just have to take your time, this is one of the things that you really need to take your time own. Noithing is worse then chasing down electrical issues.

 

thanks guys

 

nice ill for sure be doing some research on it before i decide or not if im gonna do it myself but thanks for the info i definately appreciate it.

 

i meant to sa go reaserch cause this was covered countless times before and like i said he can use his stock harness..

 

Yea I will do more research thanks.

 

There is a Group thread that has more than 1,100 pages on wire tucks.
https://honda-tech.com/forums/honda-acura-28/shaved-tucked-customized-engine-bays-pics-theory-discussion-1693934/
Apparently no one even tries to do a search before posting anything any more.