engine harness tuck
#3
Re: engine harness tuck
This doesn't make any sence.
First, you can do your own harness, or buy a brand new one from chasebay's or rywire. There are other, but these are the best known.
It's not terribly difficult to do it, but you can really **** your day up if your not paying attension.
My freind tucked his whole bay. We are now hunting down the cause of a few sensors not reading, and the most recent, lack of spark.
First, you can do your own harness, or buy a brand new one from chasebay's or rywire. There are other, but these are the best known.
It's not terribly difficult to do it, but you can really **** your day up if your not paying attension.
My freind tucked his whole bay. We are now hunting down the cause of a few sensors not reading, and the most recent, lack of spark.
#5
Re: engine harness tuck
You really just have to take your time, this is one of the things that you really need to take your time own. Noithing is worse then chasing down electrical issues.
#7
Re: engine harness tuck
Took 2 of my buddys and my self about a 2 days to do his complete bay. Headlight,engine,etc. This was driving the car in, and driving it out. Dash was pulled, fenders, and more. We also did a s2k mc, and tucked clutch line.
You really just have to take your time, this is one of the things that you really need to take your time own. Noithing is worse then chasing down electrical issues.
You really just have to take your time, this is one of the things that you really need to take your time own. Noithing is worse then chasing down electrical issues.
Trending Topics
#8
Honda-Tech Member
Re: engine harness tuck
This doesn't make any sence.
First, you can do your own harness, or buy a brand new one from chasebay's or rywire. There are other, but these are the best known.
It's not terribly difficult to do it, but you can really **** your day up if your not paying attension.
My freind tucked his whole bay. We are now hunting down the cause of a few sensors not reading, and the most recent, lack of spark.
First, you can do your own harness, or buy a brand new one from chasebay's or rywire. There are other, but these are the best known.
It's not terribly difficult to do it, but you can really **** your day up if your not paying attension.
My freind tucked his whole bay. We are now hunting down the cause of a few sensors not reading, and the most recent, lack of spark.
#10
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: engine harness tuck
There is a Group thread that has more than 1,100 pages on wire tucks.
https://honda-tech.com/forums/honda-acura-28/shaved-tucked-customized-engine-bays-pics-theory-discussion-1693934/
Apparently no one even tries to do a search before posting anything any more.
https://honda-tech.com/forums/honda-acura-28/shaved-tucked-customized-engine-bays-pics-theory-discussion-1693934/
Apparently no one even tries to do a search before posting anything any more.
Thread
Thread Starter
Forum
Replies
Last Post
Pandahatch
Welding / Fabrication
4
12-27-2006 08:08 PM