Searched around and couldn't find much information about how much power the dual walbro can handle on gas. How much power can ID 1000s and dual walbro can make?

 

http://ht-archive.org/showthread.php?p=41561489

 

limiting factor will be the ID1000s for sure

 

Dual Walbro's are not listed there, but the owner of Import Auto Pros is running dual walbro's with bosch 1600cc injectors and an FJO driver. According to him, the car put down 900hp on c16 with room to play. So I don't see why this setup wouldn't be sufficient for 1000hp with 2000cc injectors.

 

Depends on what type of fuel you plan to use.

With E85, plan on those injectors reaching their limit before the fuel pumps

 

That's why I mentioned that he used c16 and you're right, would be hard for e85 to reach those numbers.

 

I made 830whp on dual walbro's and 1600 injectors with Q16.

 

What was your duty cycle?

 

Look what my friend at Option's just showed me, he will receive stock next week. I wonder how it'll compare to Aeromotive and the other intank fuel pumps?
http://www.optionsauto.com/WALBRO/pr...WAL-F90000262/

 

I have been asking alot of questions about this pump setup. If you are planning on running the ID1000's you will be fine on the dual walbros.