hi guys new to this site. i have a dc2 integra with low milage d16z6, bought a turbo kit off ebay, t25 turbo, 550cc injectors, forge bov, snail manifold, 3" downpipe, 2.5" straight through exhaust, p30 ecu mapped on crome, but i dont seem to be able to limit the boost, i wana be running about 8-10 psi, i tried lengthening actuator arm, but that didnt work just didnt spool half as fast, so i bought a forge adjustable actuator (not cheap) and a 5-8 psi spring to go inside so that i could get a electronic boost controller and raise the boost when i wanted etc. fitted it all today and took it for a spin and its still boosting to about a bar without the boost controller being fitted, really nervous about driving it like this as i already snapped a rod on a previous engine and dont wana do the same to this low miler. if anybody could be of help it would be much appreciated. many thanks wyn