Boost problem
#1
Thread Starter
Join Date: Sep 2009
Location: North Matewan, Wv
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Boost problem
I just recently had my hahn 16g turbo rebuilt.
and after i reinstalled it, i couldnt build any boost.
the shaft spins freely, and ive took all my charge pipes off and recoupled them. my Bov opens and closes fine and all of my vac lines seem to be alright..
but for some reason my car will not build boost..
any suggestions would help.
it has a d16z6 motor.
I put a boost gauge on and i pull a 20vac and when at WOT it will barely move from 0.
I done a boost leak test and couldnt find any major leaks.
and after i reinstalled it, i couldnt build any boost.
the shaft spins freely, and ive took all my charge pipes off and recoupled them. my Bov opens and closes fine and all of my vac lines seem to be alright..
but for some reason my car will not build boost..
any suggestions would help.
it has a d16z6 motor.
I put a boost gauge on and i pull a 20vac and when at WOT it will barely move from 0.
I done a boost leak test and couldnt find any major leaks.
Thread
Thread Starter
Forum
Replies
Last Post