i have a ls-vtec in my rhd integra.

the car ran hard as hell, but vtec wasnt engaging like i wanted it to.
so i pulled the computer out, and reburned a map onto the chip.
i put the chip back in, and it wont run without a check engine, the car has a sporadic idle (kinda like the iacv is bad) and the car feels super sluggish(check engine on too).

i put in a chipped p06 computer on stock p06 map, and it runs with no issues, idle or normal driving(check engine off).

when it would run with the check engine,and chip, i would use the 2pin jumper to read the code it was throwing. i turn the ignition on, and its solid.(no blinking what so ever)

so i cant retrieve a code, but its throwing a check engine.

also i must add that when the car is idling funny (at 2k) with the cel, i **** with the wires going to the ecu, the car starts dropping in idle, and fluctuating between high and low.

please some help would be appreciated.

 

sweet. no responses

 

sweet. no responses



Try Making a more appealing thread title... No one wants to read " WTF "

 

Could be a bad basemap

 

Did you try burning it on a completely different chip?

 

try a different ecu.

 

sounds like u should start with the connections to the ecu