I have read all the post on the resistor box wiring, but I just want to double check and make sure I am doing this correctly since I am doing it right now. I have already wired the 4 yellow ones from the resistor box to the 4 inkector wires. I just need to wire my red one to one of the 4 remaining wires. Now do I just wire the red one to any of the 4 remaining wires or should I solder the red one to all of them? Also after I solder the red one should I just leave the remaining wires in the dead end plug or take them out and put tape over them.

I need answers quickly!!!

Thanks

 

Anyone give any input on this so I can run out there and get it done and try and start this car up??

 

The red wire on the resister box connect to all four yellow wire at the dead end plug and leave it in the plug

 

so I just simply have to put the red wire into where one of the inkector wires use to go and I am good to go?

 

4 dead plug wires from injectors, cut them there. 4 wires from injectors, go to the resistor box. tie the other wires together and solder them to the red wire.

https://honda-tech.com/forums/forced-induction-16/official-injector-resistor-box-install-56k-buy-broadband-517274/

 

I have seen that thread I just did not quit understand what to do on that part. Do you leave the 4 wires you are soldering together in the plug still?

So far I cut the injector wires to the dead plug and soldered them to the 4 black ones from the resistor box.(I just leave the dead ends of the injector wires into that dead end plug?? Correct?) And now that I found that out about the red wire I will solder it to all 4 of the leftover wires.

 

????? Need to get this car going ASAP!

 

you solder the 4 wires off the dead plug to the four on the resistor box..then the other four you solder into one wire and solder it to the red wire on the resistor box man..check the pics on that thread..you can see it there..let us know how it works

 

http://www.c-speedracing.com/howto/r...box_wiring.php

 

I see where I was getting confused at. Thanks for helping me out guys.

 

grate link gona need this in a few months lol