Well i picked up a gsr head and im gonna turbo it i need advice on what parts i should pick up for it and i kinda want specifics thanks

 

Actually, if you're looking at about 400-450whp, and the head is complete, really... Nothing.

Sure you can make sure the head is straight by going to a machine shop to pressure test, and resurface the head. otherwise, use some ARP headstuds and a good OEM headgasket. Call it a wrap.

Anything more and you'll need to get specific as to what you're trying to achieve

 

I got the head checked already its good i just need cams cause it has none i dont have a block yet have to pick on up

But im trying to get about 300 -400 i was looking at brian crower standard valves , high pressure dual race valve springs, retainers.

 

Overkill. Especially for 300-400whp. Turbo cams are not AT ALL needed on a Honda. Stick w/ some GS-Rs, look at what I wrote above, and look towards your block.

 

ok then what kinda love do you recommend for the block when i pick one up

 

h-beam rods and some forged pistons. get them the block bore .5over and throw the headstuds in it and start tuning and get your 450hp pretty easily

 

when i order the pistons should they be standard pistons or what im new to some of this