I want to see how to run mine. Thanks

 

Google

 

Thanks buddy. I searched and couldn't find anything.
I'm worried since my return line might be touching my manifold.

 

use heat wrap

 

Thanks I have a heat wrap. Did you use a 45 on the oil pan and a straight fitting on the turbo?

 

touching is deff. a bad idea. make some kind of bracket to pull it away from the manifold. the heat wrap and steel braiding will only do so much, remember it still is a rubber hose under all that.

 

What are you using for hose?

 

what about some -10an steel braid line?

 

yea 45 off the oil pan.

the -10 is still has rubber under the steel so theres a chance it could melt

 

here is a pic of mine it wasn't connected to the turbo yet because i had to make it a little shorter.

 

true... didnt think about it

 

My return is a -10 steel braided hose with a DEI heat wrap. I'm going to try to get it away from the manifold. I'll post pics when I install it. Thanks for all the pics. Is anyone running the return through the two runners on the manifold to the oil pan?

 

I wouldn't run the return thru the runners. Keep it away from the runners as far as possible. Sometimes though, layout doesn't allow it.

 

Ya I don't have space through the runners.