ive been having a idle proboblem and i want to check my pcv but i dont know where it is.

 

top of valve cover. Upper center of the cover its just pushed in their. You can remove it without any tools. But if you are having idle problems i would check clean that and also clean the iacv that is bolted to the back of the intake manifold. They are usually the problem.

 

I thought the PCV was in the IM not the valve cover

in fact I just looked at my teg, there are no valves or sensors mounted in the valve cover

there is a breather hose from the air pipe to the vc but the PCV valve is in the intake manifold

 

The PCV valve isn't in the valve cover, it's plugged into the IM on the front side of the IM behind the Valve cover.

 

and u really should check your IAC cuz i had that same problem and that was the cause of it

 

I meet your IACV
and raise you an FITV

 

i love how everyone on here can tell him where it is or isnt without knowing what engine this kid is running. in fact if he has a 98-01 ls valve cover the pcv valve WILL be on top in the center of the valve cover. with a hose going from the intake manifold to the pcv valve. im tired of the people on this site and their misinformation. ask questions then give answers.

 

Actually on some motors it is. If its an LS B18B the newer ones will have it on the valve cover. If its a gsr b18c1, its a PITA to get at since its buried beneath the IM.

Now i remember why i never come into the Integra section anymore.

 

I hate it when they are on the im. I always end up breaking them getting them off too